Options |
| part number |
Description |
| TO01 |
Heater Option
Extends range of operational temperature from -30 °C to -46 °C
(-50 °F). |
| TO02 |
Battery Option
You should have this option if you expect power fails lasting longer
than 12 hours at your site. |
| TO03 |
Gear heads with ratio 592:1
for both axis instead of the standard gears 66:1. Increases the load
capacity of the tracker. (max. torque 100 Nm). Suited only for mid-
to high-latitude sites |
| TO04..TO08 |
Mechanical Interfaces for various types of instruments.
Please ask for further details. |
Kits |
| TK00 |
Axis Extension Kit
consisting of an axis extension and a flange type 1. Typically used
to have a second flange for additional instruments on the secondary
axis. |
| TK01-ex1 |
Shading Disk Kit (Single)
includes all parts that are needed (in addition to the base unit)
to operate a single shaded pyrano- or pyrgeometer with INTRA. The
parts included are the followings: 2 axis extensions, 2 flanges type
1, 1 pyranometer-flange (for instrument with or without ventilator),
1 Shading disk mechanism, 1 arm extension of length 160, 210 or 510
mm and a shading disk of diameter 63 or 90 mm. Please specify extension
of the parts number: -ex1 = -nnn-ii-dd, where nnn is for the arm-length
065, 070 or 1000 and ii is for the instrument plate KZ, EO,EK, KZV
or EPV and dd = 63 or 90 is for the diameter of the shading disk. |
| TK02-ex2 |
Dual Shading Disk Kit
includes all parts that are needed (in addition to the base unit)
to operate two shaded pyrano- or pyrgeometers with INTRA. The parts
included are the followings: 1 axis extension, 1 flange type 1, 1
instrument platform for 2 instruments, 1 Shading disk mechanism, 1
arm extension of length 160, 210 or 510 mm and a dual shading disk
of diameter 63 or 90 mm. Please specify extension of the parts number
ex2 = -nnn-dd, where nnn is for the arm-length 065, 070 or 1000 mm
and dd = 63 or 90 is for the diameter of the shading disk. |
Accessories |
| TE01 |
Electrical Interface Box
Connection box for easy interfacing of INTRAs special cable to the
supply- and communication lines. Box includes "coarse lightening
protection circuits" and a connector to connect a terminal. Box
environmentally sealed (IP65), with three all-weather resistant inlets
for the cables to and from the box. |
| TE02 |
AC-Power Module
AC/DC converter. input 100-120/220-240 VAC (selectable), output 24VDC
(nom.), 200 W max. "Coarse"-lightening protection circuits
are included to protect the AC/DC power module and the serial link
to the tracker. Assembled in a all-weather resistant box (IP65), dimensions
260 * 160 * 93 mm, with three all-weather resistant inlets for the
cables to and from the box. The module provides sufficient power to
operate one INTRA with heater option. |
| TA02-2 |
Pod
stable support for INTRA. |
| TA03 |
Mechanical Interface
to attach Electrical Interface Box (TE01) or AC-Power Module (TE02)
to Pod (TA02-2). |
